Installing a fire door is an easy process, you could DIY. When it comes to installing the metal security doors it is fairly easy to install them so most of the people like to do it themselves instead of paying a high cost of installation to any professional. These metal security doors are available at any local store of home improvement. You can install these doors very easily if you follow the steps given here.Get more information at fire rated doors website.
You need to get the measurements of the place where you want to install the metal security door and then select the right door for your home and business needs. You need to make sure that you have all the accessories and all the hardware that is needed to install the metal security door and you can do so by checking with the instructions provided by the manufacturer. The hardware that is needed to mount it should be included with the package of the door when you buy it. To keep it easy for you, you should take out all the accessories needed for the installation along with the tools.
Make use of the measuring tape in order to measure the height of the opening of the door. Start to measure from the header i.e. the top of the inner frame of your door to the threshold i.e. the bottom of the inner frame. There is a piece that is include with the door when it is purchased named as Z bar, this piece is attached to the metal security door. You will need to make use of the hacksaw in order to cut the Z bar in a way so that it can fit in the opening of the door. You can do this by cutting this bar by keeping it about 3/16 inches less in comparison to the width of the frame of the door.
Now you have to put the metal security door inside that frame. Check the placement of the door to make sure that it is properly placed. Use some help if you want to. You will need an electrical drill in order to secure the door to the molding of brick. Use the screws included for this purpose. Install the screws properly and check the door by opening and closing it for proper working. Now you need to install the header above the metal security door. Check for the holes in it to install the screws. You need to make use of a screw driver for this purpose.